Toa N-8000 Series Ver.1.41 - Manual (Page 40)

1-27
Chapter 1: GENERAL DESCRIPTION
14. Handset connection terminals [CN302]
A dedicated RS-191 Option Handset can be
connected. (Refer to
p. 3-24 .)
15. External dial input terminals [CN306]
An external switch such as a footswitch can be
connected. (Refer to
p. 3-25 .)
One-touch dial function needs be programmed
when using the external switch. (Refer to
p. 2-10 .)
2
1
3
4
5 6
6.11. N-8050DS Door Station
[Front] [Rear]
1. Speaker
Outputs call tones and used for hands-free
conversations.
2. Status indicator (Red)
Flashes when a call is received, continuously
lights during a conversation, and is off while in
standby mode. The indicator also continuously
lights while receiving a paging announcement.
3. Call button
Used to call the pre-programmed master station.
4. Microphone
Used for hands-free conversation.
5. Line connection terminal [LINE]
Connects to the exchange. (Terminal block)
(Refer to
p. 3-22 .)
6. Contact output terminals [H, C]
External equipment such as an electronic lock can
be connected.
(Output capacity: 30 V DC and 50 mA)
(Refer to
p. 2-38, p. 2-39, p. 3-25 .)