Toa N-8000 Series Ver.1.41 - Manual (Page 31)

1-18
Chapter 1: GENERAL DESCRIPTION
9. Redial key [REDIAL]
Permits the last called number to be dialed.
(Refer to
p.2-6 .)
10. Function key [FUNCTION]
Use this key to perform function settings such as
assigning call transfer recipients or programming
one-touch dialing.
11. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to
p. 2-7 .) Also, pressing this
key during a hands-free conversation establishes
a one-way conversation from the party who
pressed the key. (Refer to
p. 2-6 .)
12. Dial keys
Use these keys to make a call or set a function.
13. Clear key [C]
Terminates the conversation.
14. Arrow keys [ ][ ][ ][ ]
Use these keys to perform auto-dial registration
(refer to
p. 2-9 ) or system settings (refer to
Chapter 7 ).
15. Paging key [CALL]
Makes a paging. (Refer to p. 2-23 .)
16. Paging response key [RESP.]
Responds to a paging.
(Refer to
p. 2-27 .)
17. Hold key [HOLD]
Places the conversation on hold.
(Refer to
p. 2-11 .)
18. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to
p. 2-12 .)
21 20 19
19. External speaker terminal [EXT.SP.]
An external speaker (8 Ω, 0.6 W) can be
connected to this terminal. (Refer to
p. 3-23 .)
Shift the Speaker selector switch (22) located on
the bottom surface of the unit to the EXT.SP
position when using the external speaker.
20. Headset terminal [HEADSET]
Connects to a headset. Connection of the
headset disables the speaker.
21. Line connection terminal [LINE]
Connects to the exchange. (RJ-11 modular jack)
[Rear]