Toa N-8000 Series Ver.1.41 - Manual (Page 155)

5-11
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
4.2. Menu
4.2.1. File
Save: Saves the resultant data of the scanned equipment in "CSV" format.
Print: Prints the resultant data of the scanned equipment.
Print Preview: Displays a print preview screen.
Print Setup:
Makes printer settings.
Close: Terminates this software program.
4.2.2. Scan
Unit scan : Detects equipment connected to the local area network.
Configuration : Uploads the selected equipment settings.
IP address : Assigns the IP address automatically and performs settings necessary for
this assignment.
"Auto assignment" : Assigns an IP address to the selected equipment automatically.
"Assignment range settings" : Sets an IP address range that can be used for automatic IP address
assignment.
"Subnet mask setting" : Sets the same subnet mask for the selected equipment.
"Default gateway setting" : Sets the same default gateway for the selected equipment.
"Select All" : Selects all detected equipment.
4.2.3. Help
Help : Displays "Help".
About : Displays the Software Program version number.
4.3. Buttons
(1) Unit Scan
Detects equipment connected to the local area network.
(2) Configuration
Writes an IP address, subnet mask, default gateway, and name to the equipment.