Toa N-8000 Series Ver.1.41 - Manual (Page 139)

4-9
Chapter 4: BEFORE PERFORMING SYSTEM SETTINGS…
1.4.3. Function settings 2
SW: p. 5-52
ST: p. 2-14
SW: p. 5-52
ST: p. 2-16
SW: p. 5-52
ST: p. 2-34
SW: p. 5-52
ST: p. 2-18
SW: p. 5-52
ST: p. 2-17
Item Default
Reference
page
Setting from
Software Setting from
browser Setting from
station
Incoming call mode* 1
Automatic connection call tone
Continuous call tone* 1
Group call member* 1
Access to priority call* 1 Unavailable
Call forwarding destination station* 1
Time-based call forwarding
destination station*
1
Absence transfer destination
station*
1
Group hunting destination station* 1
p. 5-52
p. 5-52
Automatic
connection mode
With a call tone
With a call tone
Refusal of priority call setting Allowed to accept
Level 3 Station speaker sound volume p. 5-52
Calling station indication/CCTV
called station's number
Calling station indication/CCTV
contact output number
* 1 Settings can be performed only to the N-8500MS IP Multifunctional master station.
* 2 Settings can only be performed from the N-8500MS IP Multifunctional master station.
* 2
* 2
* 2
* 2
* 2
* 2
BGM input
OFF BGM reception ON/OFF
Level 2 Microphone sensitivity
Unavailable
Access to paging call* 1 Available
External equipment control
ON/OFF*
1
OFF
p. 5-52
Door remote contact output
number
Door station mode
SW: p. 5-52
ST: p. 2-4
Level 3 Speaker output * 2
1.4.4. Speed dialing
Item Default
Reference
page
Setting from
Software Setting from
browser Setting from
station
Onetouch dial
Master calling
Auto dial
p. 5-54
p. 2-9
* 3 Settings can only be performed from the N-8000MS Multifunctional master station.
SW: p. 5-54
ST: p. 2-10
* 3
* 3