Toa N-8000 Series Ver.1.41 - Manual (Page 37)

1-24
Chapter 1: GENERAL DESCRIPTION
2
1
11 12
3
4
5
9
10
6
7
8
1. Handset
Lift the handset for handset conversation. Lifting
the handset disconnects both the hands-free
microphone and the speaker.
2. Status indicator (Red)
Flashes when a call is received, continuously
lights during a conversation, and is off while in
standby mode. The indicator also continuously
lights while receiving a paging announcement.
3. Speaker
Outputs call tones and used for hands-free
conversations.
4. Paging key [CALL]
Makes a paging. (Refer to p. 2-23. )
5. Paging response key [RESP.]
Responds to a paging. (Refer to p. 2-27. )
6. Function key [FUNCTION]
Use this key to perform function settings such as
assigning call transfer recipients or programming
one-touch dialing.
7. Redial key [REDIAL]
Permits the last called number to be dialed.
(Refer to
p. 2-6 .)
8. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to
p. 2-12 .)
9. Dial keys
Use these keys to make a call or set a function.
10. Hold key [HOLD]
Places the conversation on hold.
(Refer to
p. 2-11 .)
11. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to
p. 2-7 .) Also, pressing this
key during a hands-free
conversation establishes a one-way conversation
from the party who pressed the key.
(Refer to
p. 2-6 .)
12. Clear key [C]
Terminates the conversation.
6.9. N-8020MS Industrial-Use Master Station
[Top]