Toa SX-2000 Series Manual - Manual (Page 99)

2.6. Indicators Showing RM Broadcast Status
The Broadcast status indicator to the left of the Function key indicates the current broadcast status of other
Remote Mic.
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "Event
Settings."
Broadcast Status Indicator
Selection Indicator
Function key (RM broadcast status display key)
The meanings of the 2 indicators next to the Function Key are as follows:
Broadcast Status Indicator Unlit
Lights yellow
Indicator Status Meaning
When the Remote Mic. assigned to the function key is not
engaged in broadcasting
When the Remote Mic. assigned to the function key is
engaged in broadcasting
9-8
Chapter 9: RM-200SA REMOTE MICROPHONE
RM-210 REMOTE MICROPHONE EXTENSION
2.7. Indicators During Lamp Test
When the type of the RM-200SA is set to "Emergency/General," the lamp test function can be assigned to the
Function key.
When the lamp test function has been assigned to the Function key, the 2 indicators to the left of the key
indicate the running status of the lamp test.
Pressing the Lamp Test key causes all indicators on the Primary Remote Mic to light, and the built-in buzzer
to sound.
Notes
• For instructions on setting the surveillance function, see the separate Setting Software Instructions, "Basic
Settings."
• For the type of the RM-200SA settings, see the separate Setting Software Instructions, "System Settings."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"Event Settings."
Lamp Test Indicator (L)
Lamp Test Indicator (R)
Function key (Lamp test key)
The meanings of the 2 indicators next to the Function Key are as follows:
Indicator Status Meaning
When this Lamp test key is not pressed. Lamp Test Indicator Unlit
Lamp test has been executed by pressing this Lamp test key. Lights yellow
and green