Toa SX-2000 Series Manual - Manual (Page 113)

10-8
Chapter 10: OPERATION
1.2.5. Example of general EV broadcasting
Here, an operation example based on the zone patterns is explained.
Step 1. Press the function key R1 (zones 1, 2, and 3).
All the set zones are selected, and the zone
selection indicator of the function key R1 lights
green.
Note
To reset selection, press the function key R1
again or the function key R5 (zone clear).
The selection indicator goes off.
Step 2. Press the function key R7 (general EV
broadcast).
General EV message is broadcast to the
selected zones.
The Zone selection indicator of the
function key R7 lights green, and the
Broadcast status indicator lights yellow.
Also Broadcast status indicators of the
function keys R1, R2, R3, and R4 flash
green.
Broadcast status indicator
Zone selection indicator
Function key
R1
(Zone 1, 2 and 3)
Green
R1
(Zone 1, 2 and 3)
R2
(Zone 1)
R3
(Zone 2)
R4
(Zone 3)
Flashes green
Lights yellow
Green
Function key
R7
(General EV broadcast)