Toa SX-2000 Series Manual - Manual (Page 111)

Flashes green
R3
(Zone 2)
R2
(Zone 1)
R2
(Zone 1)
R1
(Zones 1, 2 and 3)
Function key
Yellow Green
Yellow Green
R3
(Zone 2)
R2
(Zone 1)
Broadcast status indicator
Microphone indicator
Talk key
Function key
Yellow Green
Yellow
Flashes
green
10-6
Chapter 10: OPERATION
1.2.2. Example of broadcasting to the selected (individual) zone
Step 1. Press Function key R2 (zone 1) and Function key R3
(zone 2).
Zones 1 and 2 are selected, and their zone selection
indicators light green.
Note
To cancel a selected zone, press the Function key for
that zone again. The zone selection indicator for that
key will go off.
To cancel all selected zones, press Function key R5
(zone clear). Both zone selection indicators will go
off.
Step 2. Press the Talk key.
A chime will be broadcast. This chime will be audible
through the monitor speaker built in the RM-200SA.
The Microphone indicator flashes green while
the chime is being activated. (RM-200SA only)
Note
Pressing the Talk key again
while the chime is being
activated causes the chime
to stop, ending the
broadcast in progress.
Step 3. When the microphone indicator next to the Talk
key lights green, make the microphone
announcement.
Because a potion of the pattern assigned to
Function key R1 is included in the selected
zones, the broadcast status indicator next to
this key will flash green.
Step 4. Press the Talk key.
The broadcast ends.
Step 5. Press Function key R5 (zone clear).
The zone selection is cancelled.
Note
If it is desired that the zone selection be left unchanged, there is no need to clear the selected zones.
R3
(Zone 2)
R2
(Zone 1)
Broadcast status indicator
Zone selection indicator
Function key
Green