Toa SX-2000 Series Manual - Manual (Page 72)

5-14
Chapter 5: SX-2100AO AUDIO OUTPUT UNIT
When these screens are displayed, the entire fluorescent display is as follows:
COM
FAULT
KEYLOCK
EMERGENCY
OL
0
–10
–20
–30
–40
OL
0
–10
–20
–30
–40
FADER
LEVEL LEVEL
1 2 3 4 5 6 7 8
1 2
3 3
These indicators light when the Monitor ON/OFF key is set to ON.
Lights
Lights Indicates the level being output
from the SX-2100AO. When the Monitor ON/OFF key is set to ON, this meter shows
the signal level of the output channel being monitored.
Indicates the unit's operating status when the corresponding channel key is pressed.
The indicator state differs depending on the function assigned to each channel key as follows.
The indicator of the channel selected for monitoring lights.
When the output volume control is operated, the corresponding channel indicator lights.
Function assigned
to the channel key
Display
Output ON/OFF Unlit:
Lights: When the output channel is OFF
When the output channel is ON (The indicator state is "Unlit"
when the output volume is muted.)
When operating the corresponding output volume control or
channel key
Lights:
Flashes: When the channel key is OFF
When the channel key is ON General-purpose
broadcast pattern