Toa SX-2000 Series Manual - Manual (Page 85)

8-7
Chapter 8: RM-200SF FIREMAN'S MICROPHONE
2.5. Indicators During Lamp Test
When the lamp test function has been assigned to the Function key, the 2 indicators to the left of the key
indicate the running status of the lamp test.
Pressing the Lamp test key causes all indicators on the Primary Remote Mic to light, and the built-in buzzer to
sound.
Notes
• For instructions on setting the failure detection function, see the separate Setting Software Instructions,
"Basic Settings."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"Event Settings."
Lamp Test Indicator
Function key (Lamp test key)
The meanings of the 2 indicators next to the Function Key are as follows:
Indicator Status Meaning
When this Lamp test key is not pressed. Lamp Test Indicator Unlit
Lamp test has been executed by pressing this Lamp test key. Lights yellow
and green