Toa SX-2000 Series Manual - Manual (Page 123)

10-18
Chapter 10: OPERATION
6. MONITORING INPUT/OUTPUT CHANNELS
The SX-2000AI, SX-2100AI, SX-2000AO, and SX-2100AO are equipped with monitor speakers on their front
panels, which allow monitoring of each input (SX-2000AI or SX-2100AI) or output (SX-2000AO or SX-
2100AO) channel.
The monitoring method is the same for both.
3 2
1
Fluorescent display
The figure shows the SX-2100AI.
3 3
Input ON/OFF indicator*
Note
The indications on the fluorescent display described below are those when the unit displays the default
screen.
Step 1. Set the Monitor ON/OFF key to ON.
The monitor ON/OFF indicator and monitor level meter scale on the fluorescent display will light.
Step 2. Use the plus or minus key to select the desired input (output) channel to be monitored.
Pressing the plus key increases the channel number, while pressing the minus key decreases the
channel number. The input (output) indicator for the selected channel will light red on the fluorescent
display.
Step 3. Use the monitor volume control to adjust the volume.