Toa SX-2000 Series Manual User Manual
Page 81
8-3
Chapter 8: RM-200SF FIREMAN'S MICROPHONE
[Side]
EXTENSION
19
12. Status Indicators (Red/Yellow/Green)
Light, flash, or go off depending on the current
operation state of function keys, failure state, or
emergency state. (See
)
13. Selection Indicators (Green)
Light or go off depending on the current
operation state of function keys. (See
14. Function Keys (R1 – R3)
Positioned in top-down order (R1, R2, R3).
Pressing a specific function key executes the
function that has been assigned to that key by
the SX-2000 Setting Software.
Assignment of functions to specific keys is done
using the SX-2000 Setting Software. (See the
separate Setting Software Instructions, "Event
Settings.")
15. Microphone Indicator (Green)
Lights or goes off depending on the current
operation state of the Talk key.
16. Broadcast Status Indicator (Yellow/Green)
Lights, flashes, or goes off depending on the
current operation state of the Talk key.
17. Talk Key
Press this key to broadcast a voice announcement.
It must be pressed continuously for the duration
of the broadcast.
18. Microphone
Used for voice announcements.
19. RM-210 Connection Terminal [EXTENSION]
Connect the RM-210 Remote Microphone
Extension unit to this terminal.