Toa SX-2000 Series Manual - Manual (Page 95)

9-4
Chapter 9: RM-200SA REMOTE MICROPHONE
RM-210 REMOTE MICROPHONE EXTENSION
1.2. RM-210
[Top]
1
3
2
4
1. Indication Label Insert Slot
The label can be printed using the SX-2000 Setting
Software. (See the separate Setting Software Instructions,
"Printing Labels for Remote Microphones.")
2. Status Indicators (Red/Yellow/Green)
Light, flash, or go off depending on the current operation
state of function keys, failure state, or emergency state.
(See
p. 9-5 )
3. Selection Indicators (Green)
Light or go off depending on the current operation state of
function keys (
p. 9-5 ).
4. Function Keys (1 – 10)
Positioned in top-down order (1, 2 ... 10).
Pressing a specific function key executes the function that
has been assigned to that key by the SX-2000 Setting
Software.
Assignment of functions to specific keys is done using the
SX-2000 Setting Software. (See the separate Setting
Software Instructions, "Event Settings.")