Toa SX-2000 Series Manual - Manual (Page 107)

10-2
Chapter 10: OPERATION
1. BGM AND GENERAL BROADCASTING
1.1. Broadcasting from the SX-2000AI, SX-2100AI, SX-2000AO, or SX-2100AO
The front-mounted function keys or channel keys can be used to make broadcasts.
Function key F1 – 4
Channel key 1 – 8
Note: The figure shows the SX-2100AI.
1.1.1. Broadcasting using the function key
Function keys F1 – F4 on the front panel can be used to change or end the BGM pattern, or to activate or end
the general-purpose pattern broadcast.
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "Event
Settings."
[Setting example to function keys]
Function key F1
Function key F2
Function key F3
BGM pattern 1
BGM pattern 2
BGM end
Activation of BGM pattern 1 broadcast
Activation of BGM pattern 2 broadcast
End of BGM
Function key F4 General broadcast pattern 1 Activation and end of general broadcast pattern 1 broadcast
Key Item Name Function
[BGM Broadcast Example]
Following is the operation example in the case where BGM broadcast is made by the BGM pattern 1 in the
morning and changed to the BGM pattern 2 in the afternoon, and then ended.
Step 1. Press function key F1 (BGM pattern 1) to activate BGM pattern 1 broadcast.
Step 2. Press function key F2 (BGM pattern 2) to switch BGM pattern 1 broadcast to BGM pattern 2
broadcast.
Step 3. Press function key F3 (BGM end) to end BGM.
[General-Purpose Pattern Broadcast Example]
Following is the operation example in the case when the general broadcast pattern 1 is activated, and then
ended.
Step 1. Press function key F4 (general broadcast pattern 1) to activate general broadcast pattern 1 broadcast.
Step 2. Press function key F4 (general broadcast pattern 1) to end general broadcast pattern 1 broadcast.