Nomenclature and functions, Front – Toa SX-2000 Series Manual User Manual
Page 12
2-2
Chapter 2: SX-2000AI AUDIO INPUT UNIT
Protective cover
Inside of the protective cover
1
2
3
11
4 5 6 7 8
9
10
12
13
14
15
16
18
19
17
20
0123
4
56
789
AB
C
D
EF
0123
4
56
789
AB
C
D
EF
1. NOMENCLATURE AND FUNCTIONS
[Front]
1. Monitor Speaker
Allows any input channel to be monitored.
2. Function Keys [F1, F2, F3, F4]
Pressing a function key executes the function that
has been assigned to that key using the SX-2000
Setting Software.
(See the separate Setting Software Instructions,
"Event Settings.")
3. Fluorescent Display
The default display shows device numbers and
firmware versions.
Displays the SX-2000AI's current operation status,
input level, etc. (See
4. Menu Key [MENU]
Pressing this key displays the fluorescent display's
menu screen. Whenever this key is pressed, the
screen returns to the default display for whatever
portion of the menu screen is displayed.
5. Cancel Key [
/CANCEL]
Used to switch the menu screen.
6. Minus Key [–]
Used to switch the menu screen. When the
Monitor ON/OFF Key (15) is set to ON, use this
key to select which channel to monitor.
The selected channel number decreases by one
each time this key is pressed.
7. Plus Key [+]
Used to switch the menu screen. When the
Monitor ON/OFF Key (15) is set to ON, use this
key to select which channel to monitor.
The selected channel number increases by one
each time this key is pressed.
8. OK Key [OK/
]
Used to switch the menu screen.
9. Power Indicator [POWER] (Blue)
Lights when the power is switched on.
10. CPU OFF Indicator [CPU OFF] (Red)
Lights while the general urgency all-call (CPU
OFF state) is being made
Device No.
A I –
1
V E R
3 0 0
.
.
Firmware version