Toa SX-2000 Series Manual - Manual (Page 40)

3-15
Chapter 3: SX-2100AI AUDIO INPUT UNIT
[Control Output Status Display (ai13), Control Output Status Detail Display (ai14)]
Displays the current control output status.
"o" is displayed when the control output is on, and "–" is displayed when the control output is off.
In the Control Output Status Detail Display screens, pressing the plus or minus key alternates the display
between a group of Control output 1 – 8 and that of Control output 9 – 16 (alphabets A to F represent 11 to
16).
The control output numbers correspond to the screen displays as shown in the table above.
C O N T R O L O U T P U T
/CANCEL
OK /
C O 9 – 0 – A – B o C – D – E – F o .
C O 1 – 2 – 3 – 4 o 5 – 6 – 7 – 8 o .
Control output number Screen display
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Control output number Screen display
9 9
10 0
11 A
12 B
13 C
14 D
15 E
16 F
3.3.3. Equipment Information Display (ai15)
3 – U N I T S T A T U S
Display screen for menu item "Equipment Information."
0 0 – 0 5 – F 9 – F F – 8 5 – 3 E M A C A D D R E S S
/CANCEL
OK /
[MAC Address Menu Display (ai16), MAC Address Display (ai17)]
Displays the MAC address* set to the SX-2100AI on the Mac Address Display screen.
* A 12-digit hexadecimal address inherently assigned to and unique to a networking device.