Toa SX-2000 Series Manual - Manual (Page 22)

2-12
Chapter 2: SX-2000AI AUDIO INPUT UNIT
V O L U M E C h 1 – 1 0 d B : P A N E L V O L U M E
/CANCEL
OK /
[Front Panel Volume Display (AI7), Front Panel Volume Detail Display (AI8)]
Indicates the input volume level set using the front panel's input volume control in the input level meter.
Besides, on the Volume Setting Detail Display screen, the set value for each input channel can be confirmed.
Pressing the plus key increases the channel number by one and displays the setting value for that channel.
Pressing the minus key decreases the channel number by one and displays the setting value for that channel.
When these screens are displayed, the entire fluorescent display is as follows:
COM
FAULT
KEYLOCK
OL
0
–10
–20
–30
–40
OL
0
–10
–20
–30
–40
FADER
LEVEL LEVEL
1 2 3 4 5 6 7 8
1 2 3 4
5 6 7 8
EMERGENCY
Indicates the levels set using the Input volume controls.
Lights
Lights
The indicator of the channel selected for monitoring lights. When
the input volume control is operated, the corresponding channel
indicator lights.
Lights when the input status is on, and goes off when the input
turns off. However, when the input volume is muted, this indicator
goes off. Also, when the input volume control or channel ON/OFF
is operated, the indicator of the corresponding channel lights.
3 3