Toa SX-2000 Series Manual - Manual (Page 41)

3-16
Chapter 3: SX-2100AI AUDIO INPUT UNIT
[Equipment Version Display (ai20)]
U N I T V E R 3 _ 0 0 _ 0 0 0 .
Displays the SX-2100AI's firmware version.
[Sub CPU Version Display (ai21) ]
S U B C P U V E R 1 2 . .
Displays the version of software related to operations and displays on the SX-2100AI's front panel.
S L O T 1 D – 9 2 1 E / F ( A )
Represents the module model number.
S L O T 1 A 2 D 3 C 4 – . . . .
Slot number
Characters that represent module model numbers.
/CANCEL
OK /
[Slot Status Display (ai18), Slot Status Detail Display (ai19)]
Displays which module is installed in the SX-2100AI's rear panel slots 1 – 4.
Alphabets A – D represent module model numbers as shown below.
A: D-921F and D-921E
B: D-922F and D-922E
C: D-936R
D: SX-200RM
–: Module is not installed.
The Slot Status Detail Display shows which module is installed in the SX-2100AI's rear panel slots 1 – 4 using
a model number for each slot. Slots with no installed module are displayed as "BLANK."
Pressing the plus key increases the slot number by one and displays information for that slot number.
Pressing the minus key decreases the slot number by one and displays information for that slot number.
[SX-2000SM Version Display (ai22) ]
S X – 2 0 0 0 S M V E R 3 0 0 . .
Displays SX-2000SM firmware version.
It appears when the communication with the SX-2000SM is complete. Before that, "Ver.–.– –" is displayed on
the version display section.