Toa SX-2000 Series Manual - Manual (Page 96)

9-5
Chapter 9: RM-200SA REMOTE MICROPHONE
RM-210 REMOTE MICROPHONE EXTENSION
2. INDICATOR STATUS
2.1. Indicators During Zone Selection
When a zone selection (pattern or individual) function has been assigned to a function key, the 2 indicators to
the left of the key indicate its zone selection and broadcast status.
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "Event
Settings."
Broadcast Status Indicator
Zone Selection Indicator
Function key (Broadcast zone selection key)
Indicator meanings are as follows:
Indicator Status Meaning
Zone Selection Indicator
Broadcast Status Indicator
Unlit
Unlit
Lights green
Flashes green
Lights yellow
No zone selected
Zone selected
A part of zones or the entire zone assigned to this Broadcast
Zone Selection key is occupied by a broadcast from another
device (secondary Remote Mic. or general EV message), or
a part of zones is engaged by a broadcast from the primary
Remote Mic (RM-200SA).
Flashes yellow All the zones assigned to this Broadcast Zone Selection key
are engaged by a broadcast from the Secondary Emergency
Remote Mic.
Zones assigned to this Broadcast Zone Selection key not in
use or BGM broadcast in progress
All the zones selected by this Broadcast Zone Selection key
on the primary Remote Microphone are engaged by a
broadcast from the primary Remote Mic.
Flashes red All the zones assigned to this Broadcast Zone Selection key
are engaged by an alert message.
Lights red All the zones assigned to this Broadcast Zone Selection key
are engaged by an evacuation message.
Lights green All the zones assigned to this Broadcast Zone Selection key
are engaged by a reset message.