Toa SX-2000 Series Manual - Manual (Page 100)

9-9
Chapter 9: RM-200SA REMOTE MICROPHONE
RM-210 REMOTE MICROPHONE EXTENSION
Flashes
yellow
When this Failure output receipt key is not pressed.
When this Failure output receipt key is pressed. (as long as it
is pressed.)
Lights yellow
Indicator Status Meaning
Key ON/OFF Indicator
Failure Output Receipt
State Indicator
Unlit
Lights green
When the failure output pattern assigned to this Failure
output receipt key has occurred.
Failure output pattern has been acknowledged after pressing
this Failure output receipt key.
2.8. Indicators on Failure Output Receipt
When the SX-2000 system is set to enable "Surveillance function," the failure output receipt function can be
assigned to a function key.
When the failure output receipt function has been assigned to the Function key, the 2 indicators to the left of
the key indicate the occurrence and failure output receipt status of the failure output pattern.
Notes
• For instructions on setting the surveillance function, see the separate Setting Software Instructions, "Basic
Settings."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"Event Settings."
• For instructions on assigning the failure output pattern, see the separate Setting Software Instructions,
"Pattern Settings."
Failure Output Receipt State Indicator
Key ON/OFF Indicator
Function key (Failure output receipt key)
The meanings of the 2 indicators next to the Function Key are as follows: