Toa SX-2000 Series Manual - Manual (Page 5)

Chapter 1
SX-2000SM SYSTEM MANAGER
The SX-2000SM System Manager is capable of performing audio signal routing and priority
control for the entire SX-2000 system. It comes with 8 control inputs, 8 control outputs, failure
status output, failure status input, and other functions that include keys, access indicators, mode
indicators and failure indicators, enabling a wide range of control and status monitoring.
Each function can be set using the SX-2000 Setting Software, and the settings data saved to a
Compact Flash (CF) card. By inserting the programmed CF card into the SX-2000SM, each
control can be performed for the entire system. It is also possible to record the entire system's
operation log and store its contents on the CF card as an operation log.
The SX-2000SM is a 1U-size* unit that can be mounted in an EIA equipment rack. It has two
power supply inputs, one of which can be connected to a backup power source to protect against
power failures.
*1U size = 44.5 mm (standard size)