Toa SX-2000 Series Manual - Manual (Page 90)

8-12
Chapter 8: RM-200SF FIREMAN'S MICROPHONE
2.11. Indicator State at the Time of Emergency Sequence Phase Shift
When the system is set to "Emergency," the emergency sequence phase shift function can be assigned to a
function key.
Pressing the function-assigned key causes the set emergency sequence to shift to the next phase.
The 2 indicators next to the Function key indicate the emergency sequence phase state.
Notes
• For the emergency function settings, refer to the separate Setting Software Instructions, "Basic Settings."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"Event Settings."
Indicator Status Meaning
This Phase shift key is not pressed. Key ON/OFF Indicator
Phase State Indicator
Unlit
Lights green
This Phase shift key is pressed. (as long as it is pressed) Lights green
Unlit
Emergency sequence Phase 1 is assigned to this Phase shift
key.
Flashes green Emergency sequence Phase 2 is assigned to this Phase shift
key.
Emergency sequence Phase 3 is assigned to this Phase shift
key.
Phase State Indicator
Key ON/OFF Indicator
Function key (Phase shift key)
The meanings of the 2 indicators next to the Function Key are as follows: