Toa SX-2000 Series Manual - Manual (Page 24)

2-14
Chapter 2: SX-2000AI AUDIO INPUT UNIT
[Equipment Version Display (AI16)]
U N I T V E R 3 _ 0 0 _ 0 0 0 .
Displays the SX-2000AI's firmware version.
3.3.3. Equipment Information Display (AI11)
3 – U N I T S T A T U S
Display screen for menu item "Equipment Information."
0 0 – 0 5 – F 9 – F F – 8 5 – 3 E M A C A D D R E S S
/CANCEL
OK /
[MAC Address Menu Display (AI12), MAC Address Display (AI13)]
Displays the MAC address* set to the SX-2000AI on the Mac Address Display screen.
* A 12-digit hexadecimal address inherently assigned to and unique to a networking device.
S L O T 1 D – 9 2 1 E / F ( A )
Represents the module model number.
S L O T 1 A 2 D 3 C 4 – . . . .
Slot number
Characters that represent module model numbers.
/CANCEL
OK /
[Slot Status Display (AI14), Slot Status Detail Display (AI15)]
Displays which module is installed in the SX-2000AI's rear panel slots 1 – 4.
Alphabets A – D represent module model numbers as shown below.
A: D-921F and D-921E
B: D-922F and D-922E
C: D-936R
D: SX-200RM
–: Module is not installed.
The Slot Status Detail Display shows which module is installed in the SX-2000AI's rear panel slots 1 – 4 using
a model number for each slot. Slots with no installed module are displayed as "BLANK."
Pressing the plus key increases the slot number by one and displays information for that slot number.
Pressing the minus key decreases the slot number by one and displays information for that slot number.