Toa SX-2000 Series Manual - Manual (Page 130)

10-25
Chapter 10: OPERATION
8. LAMP TEST
Executing the lamp test at each of the SX-2000SM, RM-200SF, RM-200SA, and RM-210 causes its all
indicators to light up and the built-in buzzer to sound, permitting the operation test for the indicators and
speaker.
8.1. Remote Microphone's Operation Example
[Remote Microphone's Function key setting]
FIREMAN'S MICROPHONE
RM-200SF
Key Set function
RM-200SF
RM-210
1
2
3
4
5
1
2
3
4
5
(Not set)
Talk key (fixed)
Failure Output Reset
Lamp Test
Zone Selection Clear
6
7
8
9
10
11
12
13
14
15
Failure Output Receipt 15
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "Event
Settings."
Step 1. Continuously press the Lamp
Test key (5).
All the indicators except the CPU
indicator light and the buzzer
built in the RM-200SF sounds.
Step 2. Confirm that the indicators and
speaker operate correctly as in
Step 1.
Step 3. Release the Lamp Test key (5)
to finish the lamp test.
FIREMAN'S MICROPHONE
RM-200SF
RM-200SF RM-210
CPU indicator