Sharp AQUOS Crystal - Manual (Page 363)

Settings 354
The Bluetooth ® settings open.
Bluetooth
®
Settings Operations
n
Enable Bluetooth: In Bluetooth
®
settings, touch the slider or .
l
Touch to enable and to disable.
l
Alternatively, touch Bluetooth > or .
n
Enable Your Phone to be Discoverable to Other Devices: From Bluetooth ® settings, touch
your phone name.
l
Touch the phone name to toggle discoverable/hidden setting.
l
The indication below the phone name shows the discoverability status.
l
After the predetermined time, the phone returns to hidden mode and is no longer
discoverable by nearby devices.
l
This setting is available when Bluetooth
®
is enabled.
n
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
Bluetooth
®
settings, touch the device name in the “AVAILABLE DEVICES” list and follow the
onscreen instructions.
l
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, touch SEARCH FOR DEVICES to search again.
l
This setting is available when Bluetooth ® is enabled.
n
Change the Name of a Paired Device: From Bluetooth ® settings, touch next to a paired
device name, touch Rename, enter a new name, and touch OK.
l
This setting is available when Bluetooth
®
is enabled.
n
Cancelling Pairing: From Bluetooth ® settings, touch next to a paired device name, and
then touch Unpair.
l
This setting is available when Bluetooth ® is enabled.
n
Enable Service from Paired Device: From Bluetooth
®
settings, touch next to a paired
device name, and then touch the listing under PROFILES.
l
If a confirmation prompt appears, follow the onscreen instructions.
l
This setting is available when Bluetooth ® is enabled.
l
This setting is available when the paired device is providing a service.
l
Touch the setting to toggle or .