Blind hem – Kenmore 385.166551 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Blind hem
The blind hem stitch can be neatly done on most knit fabrics.
Machine setting
Number of threads;
3
Number of needles:
(Remove the needle on the ieft.)
1
Differential feed ratio:
1.0
Stitch length:
3
Right needle thread tension (Blue):
1 to3
Upper looper thread tension (Red):
1 to3
Lower looper thread tension (Green):
1 to3
Lower looper pre-tension setting slider:STD
Needle plate setting knob:
Thread:
S
Needle:
Transparent thread
Upper & lower loopers:
Fine thread
V
(size 80 to 100)
J
Method
Q] Fold the fabric as illustrated.
® Wrong side
(D
Hem bottom
(D
1/4" (0.6 cm) lip
(4) Hem line
I Position hem line under the presser foot so that the
needle will only pierce the edge of the fold. The
remainder of the lip will automatically be trimmed.
® Wrong side
I Unfold and press fiat.
(T) Wrong side
(2) Right side
“A
82