Kenmore 385.166551 - Manual (Page 70)

Picot edge
f
Machine setting
Number of threads: 3
Number of needles: 1
(Remove the needle on the left.)
Differential feed ratio: 1.0
Stitch length: 3 to 4
Right needle thread tension (Blue): 3 t o 5
Upper looper thread tension (Red): 2 to 4
Lower looper thread tension (Green): 3
Lower looper pre-tension setting slider; R.H.
Needle plate setting knob:
R
Thread:
Needle: Synthetic thread
Upper looper:
No.80-100
Synthetic thread
Lower looper;
No.60-100
or silk thread
No.50-100
Synthetic thread
V
No.60-100
or silk thread
No.50-100
Method
(T) Wrong side of fabric
(
2) Right side of fabric
(D Needle thread
(4) Lower looper thread
(5) Upper looper thread
Turn handwheel toward you a couple of times.
Insert one layer of thin fabric under the foot.
Stitch slowly.
Pull the fabric lightly to the back while serging.
62