KEYENCE CB-EP100 - Manual (Page 54)

- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3-4 Message Communication
3-30
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
(2) Writing setting values to a measuring instrument
Message communication writes parameters to the a measuring instrument.
In the following example, the offset of OUT1 is changed from 5000 to 6000.
"(2) Writing setting values to a measuring instrument" (Page 3-75)
(3) Changing programs
Message communication acquires measurement values from a measuring
instrument connected to the CB-EP100.
In the following example, the program number is set to 9.
"(3) Changing programs" (Page 3-76)
(4) Clearing an error
Message communication clears a recoverable error occurring on the CB-EP100 or
a measuring instrument connected to the CB-EP100.
"(4) Clearing errors" (Page 3-77)
Command:
6000
Response
Current program No. 3 OUT1
offset value for a measuring
instrument: 6000
CB-EP100 Scanner
Measuring
instrument
Command: 09H
Response
The program number of the measuring
instrument becomes 9.
CB-EP100 Scanner
Measuring
instrument
Command
Response
CB-EP100 Scanner
Measuring
instrument
The error is cleared and
operation is resumed.