KEYENCE CB-EP100 - Manual (Page 121)

5-5
5
Ap
pe
ndi
x
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
5-3
Default Settings
The CB-EP100 can be reset and initialized to the default settings by holding down
the reset switch (
Page 1-4) for three seconds or longer or by using the Identity
Object Reset service ( Page 5-12) for message communication. The measuring
instrument connected to the CB-EP100 will also be restarted during the process.
The CB-EP100 default settings are as follows:
* Only the BOOTP client function can be used when the IP address is 0.0.0.0. The
IP address must be set to use any other functions.
Setting Item Value after Initialization
Communication speed 10/100 Mbps automatic
IP address setting method BOOTP
IP address 0.0.0.0
*
Subnet mask 255.255.255.0
Default gateway 0.0.0.0
TCP port number 50000
Multicast TTL 1
Multicast assignment method 0 (Automatic)
Number of multicast addresses 32
Multicast address 239.255.0.0