KEYENCE CB-EP100 - Manual (Page 108)

- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3-4 Message Communication
3-84
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
(10)Setting the date and time
Message communication sets the date and time of a measuring instrument
connected to the CB-EP100.
Service code 58H is used.
The following settings are required to use this object.
• Service code
• Class ID
• Instance ID
• Service Data
• Commands
• Response (when successful)
• Response (when failed)
Item Description Data Example
Service code Specify "set date and time (58H)" (fixed value). 58H
Class ID CB Object (6BH) is specified (fixed value). 6BH
Instance ID 01H becomes a fixed value. 01H
Attribute ID There is no attribute ID. -
Service data Specifies the date and time settings.
Data length, year,
month, day, hour,
minute, second
Item Description Data Example
General status
Message communication returns status (00H) to notify
normal termination.
00H
Service response data There is no service response data. -
Item Description Data Example
General status Message communication returns a general status. 05H
Additional status Returns the additional status. -
Service response data There is no service response data. -