KEYENCE CB-EP100 - Manual (Page 30)

- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3-3 Cyclic communication
3-6
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
The following settings are required to execute cyclic communication with the CB-
EP100.
[CB-EP100]
The CB-EP100 does not require any setting.
[Scanner]
(1) Set the connection to be used.
(2) Set the devices used in cyclic communication.
Refer to the scanner manual for details on how to make the above settings.
(* No ladder program is required when cyclic communication is used.)
Cyclic communication can use the following functions:
(1) Clearing system errors
(2) Reading system status
(3) Reading error codes
(4) Reading OUT measurement values
(5) Reading judgment results
(6) Reading OUT measurement value status
(7) Reading measuring instrument control status
(8) Inputing control data
(9) Reading current program number
(10) Switching the programs
(11) Reading number of storage points
Configuring Cyclic Communication
Actions which can be completed with Cyclic Communication