BUCHI DuMaster D-480 - Manual (Page 323)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 323
The following table describes the entries under the "System" section:
Entry Standard Description
Logon Timeout 60 Defines the time that must expire before the program displays the
login dialog again.
User1 --- Specifies the name of the user group which the instrument
software regards as level 1 users.
User2 Specifies the name of the user group which the instrument
software regards as level 2 users.
User3 Specifies the name of the user group which the instrument
software regards as level 3 users.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Defining the analyzer / PC interface (on page 86).
 Creating new sections (on page 79).
 Granting authorizations (on page 83).
 Defining the autoexport directory (on page 95).
 Configure key value (on page 323).
 Optimizing basic instrument settings (on page 99).
 What can you modify in the configuration? (on page 78).
Configure key value (Dialog)
Function
This dialog is used to configure the system. In this dialog you allocated values to the system that
influence the system's behavior.
Safety instruction
Strictly observe the safety instruction "Improper changes" under Warning notes during operation
(on page 24).
Open
Open the "Configure instrument" dialog by selecting View > Configuration. Click:
 Edit to edit a selected entry in a section.
 Insert to create a new entry in a section.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Key Textbox/label Field to input the key. This field displays the key of an entry
previously selected in the "Device configuration" dialog and
allows you to edit this key. The field is only enabled if the
dialog was opened via the Insert button.
Value Textbox/label Field to input the value. This field displays the value of an
entry previously selected in the "Device configuration"
dialog and allows you to edit this key.