BUCHI DuMaster D-480 - Manual (Page 277)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 277
Short cuts
Invocation via the toolbar:
Note
The line to delete must be selected. Executing this command deletes the line and all subsequent lines
move up one line.
Swap samples (Dialog)
Function
In this dialog you can swap unprocessed samples in sample memory, e.g. if you want to prioritze
urgent samples.
Note
The samples are only swapped in sample memory. After displaying the dialog, you must swap the
appropriate samples on the carousel by hand.
Open
Open the dialog by selecting Edit > Swap.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Swap sample No. Textbox Field to input the number of the sample to swap.
with sample No. Textbox Field to input the number of the sample to swap.
OK Button Swaps samples in sample memory.
If the input is incorrect, i.e. if you specify samples that are
already finished, you can quit the dialog by clicking OK.
Cancel Button Aborts the process.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Prioritizing urgent samples (on page 134).
 Optimizing sample data editing (on page 99).
Edit > Modify (Command)
What is the command used for?
This command allows you to edit a finished (analyzed) sample.
Note
The field you want to change must be selected. After executing this command you can edit the
contents of the field.