BUCHI DuMaster D-480 - Manual (Page 320)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 320
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Viewing the logbook (on page 92).
 21 CFR Part 11 functionality (on page 73).
Select period (Dialog)
Function
In this dialog you select the period for which to display the logbook.
Open
Open the "Logbook for month..." dialog via Options > Logbook. Open the "Select period" dialog by
selecting File > Load.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Year Textbox with
buttons Field to input a year. You can also set the year in the
textbox using the arrows.
Month Textbox with
buttons Field to input a month. You can also set the month in the
textbox using the arrows.
OK Button Saves new settings
Cancel Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Viewing the logbook (on page 92).
 21 CFR Part 11 functionality (on page 73).
Device configuration (Dialog)
Function
In this dialog you can define initialization entries to adjust system behavior.
The individual tabs represent the respective initialization files. There are various sections in an
initialization file. Each section contains entries whose values influence the behavior of the system.
During operation, the system stores certain information in the initialization files. It is usually not
necessary to modify these values. The entries that may be changed are located on the following tabs:
 DEVICE.INI
 LEAKTEST.INI