3 layer 2 frame type statistics, 4 rmon group 1 statistics, Layer 2 frame type statistics – CANOGA PERKINS 9145E NID Software Version 3.0 User Manual
Page 82: Rmon group 1 statistics
9145E NID Software User’s Manual
Port Information
RMON Group 1 Statistics
68
Jabber Events - reports the number of frames received on the interface that had a length
greater than 1518 and had a bad CRC. This follows the definition in the RMON RFC.
Dropped - reports the number of frames that the interface was unable to transmit due to
buffer overflow or link failure.
5.3.1.3 Layer 2 Frame Type Statistics
Frames Sent - reports the total number of frames sent from the interface since the last
reset (Raw) or the last counter reset (Current).
Frames Rcvd - reports the total number of valid frames received on the interface since
the last reset (Raw) or the last counter reset (Current).
Rx Broadcasts - reports the number of broadcast frames received on the interface.
Tx Broadcasts - reports the number of broadcast frames transmitted by the interface.
Rx Multicasts - reports the number of multicast frames received on the interface.
Tx Multicasts - reports the number of multicast frames transmitted by the interface.
VLAN Tagged - reports the number of VLAN tagged frames received on the interface.
Pause Frames - reports the number of PAUSE frames received by the interface.
Filtered Frames - reports the number of frames received on the interface that were
dropped due to filtering rules.
Rx Management - reports the number of frames received on the interface that were
passed to the 9145E manager.
Tx Management - reports the number of frames received from the 9145E manager that
were passed to the interface.
5.4 RMON Group 1 Statistics
To view Remote Monitoring Specification (RMON) statistics, select RMON Group 1 Statistics (4)
from the Port Information screen (Figure 5-1) and press Enter. The RMON Group 1 Statistics
screen (Figure 5-16) opens.