CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 114)

9145E NID Software User’s Manual Class of Service Configuration
Classifier Mapping
100
the Space Bar to cycle through the IP Precedence, DSCP, and AFEF selections. Once you have
selected the desired mode, press the Space Bar to set your choice.
Figure 10-3 Ingress Tagged Packet Classifier Screen
10.2.3 Untagged Packet Classifier Mapping
To configure the queue mapping for untagged packets, type 2 and press Enter. One of the
Untagged Packet Classifier Mapping screens (Figure 10-4 through Figure 10-6) opens,
depending which mode you selected in paragraph 10.2.2.
10.2.3.1 IP Precedence Mode
Type the number of the IP Precedence, or a series of numbers such as 3-7 if desired, and press
Enter. The CoSQ setting in the column beside the IP Precedence number, or the first number/
value of the series (for example: 3 if 3 - 7) is highlighted. Use the Space Bar to scroll through the
available queues. Select a queue and press Enter. If a series of numbers was chosen, all of
those CoSQs will be changed. Once all CoSQs are set, press Esc to return to the Classifier
Mapping screen.
10.2.3.2 DSCP Mode
Type the number of the DSCP, or a series of numbers such as 8-53 if desired, and press Enter.
The cursor moves to the CoSQ setting in the column beside that DSCP number, or the first
number/value of the series (for example: 3 if 3 - 7) is highlighted. Use the Space Bar to scroll
through the available queues. Select a queue and press Enter. If a series of numbers was
chosen, all of those CoSQs will be changed. Once all CoSQs are set, press Esc to return to the
Classifier Mapping screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-1970
Model 9145E-104-0-0 V43.12 F214 00:24:10
--------------------INGRESS TAGGED PACKET CLASSIFIER MAPPING--------------------
PCP CoSQ
--- ----
0 Q1
1 Q1
2 Q1
3 Q1
4 Q2
5 Q2
6 Q3
7 Q3
Select PCP or a Range x-y [0-7]:
------------------------------------Messages-----------------------------------