CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 42)

9145E NID Software User’s Manual System Configuration
System Information
28
8. Allow UI Lockout Of User - Gives Supervisors the ability to lock users out of the system.
Use the Space Bar to select Yes or No.
9. Allow UI Logout Of User - Gives Supervisors the ability to log users off the system. Use
the Space Bar to select Yes or No.
10. UI Login Locked State - Determines the current state of the UI Login. Use the Space
Bar to cycle between Locked and Unlocked.
11. SNMPv3 Authentication Protocol - Sets the authentication protocol for SNMPv3
access. Use the Space Bar to cycle between None, MD5, and SHA.
12. SNMPv3 Authentication Password - Used to enter the SNMPv3 authentication
password. This password is not stored. It is used to generate the SNMPv3 authentication
key. Type the desired password and press Enter. Reenter the password. The password is
required to be between 8 and 15 characters. This field will be passed over if the SNMPv3
authentication protocol is set to None.
SNMPv3 Authentication Key - Displays the computed SNMPv3 authentication key. This
is a field that is shared with an SNMPv3 management application to allow authenticated
protocol exchanges.
13. SNMPv3 Privacy Protocol -The privacy protocol used for SNMPv3 access. Use the
Space Bar to cycle between None and DES.
14. SNMPv3 Privacy Password - Used to enter the SNMPv3 privacy password. This
password is not stored. It is used to generate the SNMPv3 privacy key. Type the desired
password and press Enter. Reenter the password. The password is required to be
between 8 and 15 characters. This field will be passed over if the SNMPv3 Privacy
Protocol is set to None.
SNMPv3 Privacy Key - Displays the computed SNMPv3 privacy key. This is a field that
must be shared with an SNMPv3 management application to allow private SNMPv3
protocol exchanges.
3.4.3 Delete an Account
NOTE: An account cannot be deleted while the user is logged in. In addition, you
cannot delete the last supervisor account.
Before attempting to delete an account make sure the user is logged out. Use the following
procedure to delete an account.
1. Select Delete (D) and press Enter. The first User Account will be highlighted.
2. Use the Space Bar to scroll through the user names to select the account.
3. When deletions are completed, press Esc to return to the System Configuration menu.
3.5 System Information
The System Information screen is used to add or edit administrative and circuit information, such
as the name of the 9145E, contact, location, customer, circuit, equipment codes and Common
Language Equipment Identification (CLEI) information.
System Name, Contact, and Location are the same as the MIB-II variables sysName,
sysLocation, sysContact.