CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 72)

9145E NID Software User’s Manual Port Information
Port Configuration
58
Figure 5-6 VLAN Configuration Menu
5.2.3.1 VLAN Rules
From the VLAN Configuration screen, select VLAN Rules (1) and press Enter to access the
VLAN Rules screen. Use the VLAN Rules screen (Figure 5-7) to configure the VLAN parameters
listed below.
Type the item number to change and press Enter. Use Tab or Enter to change columns. Use the
Space Bar to cycle between Yes and No. Type VLAN IDs and Priorities into the designated
areas. Press Enter to accept changes. When all VLAN parameters have been set, press Esc to
return to the VLAN Configuration menu. NOTE: Service frames do not include traffic destined to
the 9145E Management host.
1. Drop Untagged Packets? - The 9145E will discard all Service frames received on the
User or Network port that do not have a VLAN Tag. Selecting Yes discards packets.
2. Drop Packets with VLAN Tag not matching VLAN Tag A? - The 9145E discards all
Service frames received on the User or Network port that do not have a VLAN Tag
matching VLAN Tag A. Selecting Yes discards packets.
3. Remove outermost VLAN Tag? - Removes the outermost VLAN Tag from packets
received on the User or Network port. Takes no action on untagged packets. Yes removes
outermost tag.
4. Add VLAN Tag B to Untagged Packets only? - Yes adds VLAN Tag B to all untagged
packets received on the User or Network port.
5. Add VLAN tag C to tagged packets only? - Yes adds VLAN Tag C to all tagged packets
received on the User or Network port.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.16 F217 10:19:54
-------------------------------VLAN CONFIGURATION------------------------------
1) VLAN Rules
2) Port VLAN ID Translation Table
3) P-Bit Translation Tables
Select [1-3:
------------------------------------Messages-----------------------------------