beautypg.com

3 layer 2 statistics, Layer 2 statistics – CANOGA PERKINS 9145E NID Software Version 3.0 User Manual

Page 79

background image

Port Information

9145E NID Software User’s Manual

Layer 2 Statistics

65

5.3 Layer 2 Statistics

To view Layer 2 statistics, select Layer 2 Statistics (3) from the Port Information screen (Figure 5-
1) and
press Enter. The Layer 2 Statistics screen (Figure 5-14) opens.

Use the controls as listed to view the Layer 2 Statistics screen. Press Esc to return to the Port
Information screen.

Figure 5-14 Layer 2 Statistics Screen

6, Change Counter Frame Size The 9145E has a programmable counter for frames

greater than the programmed size. Type C and press Enter. Type in the desired frame
size, between 64 and 10,000, and press Enter to accept change.

7, Error Counters Type E and press Enter to view the Layer 2 Error Statistics screen

(Figure 5-15).

8, Frame Type Counters Type T and press Enter to view the Layer 2 Frame Type Statistics

screen (Figure 5-16).

9, Raw Counters These are the total counters since the last time the 9145E was reset.

Press Ctrl+T to view raw layer 2 statistics.

10, Reset Counters Press Ctrl+R to reset the counters. The counters are reset

independently of the raw counters. The raw counters can not be cleared.

11, Frame Counters Press F (available on Layer 2 Error Statistics and Layer 2 Frame Type

Statistics menus) to return to the Layer 2 Statistics screen.

Canoga Perkins Corp. Ethernet Network Interface Device 15-JUN-2009
Model 9145E-101-3-0 V43.16 F217 10:25:57
--------------------------LAYER 2 STATISTICS (CURRENT)--------------------------

User Port Net Port MPP Port
Link State UP UP ** DOWN **
Speed/Duplex 100M/FULL 1000M/FULL N/A

Frames Sent 33906 11737599 0
Frames Rcvd 11795940 0 0
Bytes Sent 4943320 12617928991 0
Bytes Rcvd 12656382843 0 0
Frames > 1518 0 0 0
Frames > 1522 0 0 0
Line Rate Utilization 1% 0% 0%

Last Counter Reset: 2 days 18:17:04

Select [(C) Change Counter Frame Size, (E) Error Counters,
(T) Frame Type Counters, (CTRL-T) Raw Counters, (CTRL-R) Reset Counters]:
------------------------------------Messages-----------------------------------