CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 27)

System Configuration 9145E NID Software User’s Manual
IP/SNMP Agent Configuration
13
Table 3-1. IP Diagnostic Function Capabilities
3.1.3 Host Table
The Host Table menu (Figure 3-5), configures the 9145E to send and receive SNMP, FTP, and
Telnet traffic to the Managing Host IP address, and access from specific Telnet clients when
Telnet security is enabled (Figure 3-6). Use the Host Access Table to configure access by each
host including access type and privileges (SNMP, FTP, Telnet).
Figure 3-5 Host Access Table Menu
Function Management IP Test IP Auxiliary IP
Ping
√ √ √
Latency & Jitter
√ √ √
Performance Maintenance (PM)
√ √
N/A
Service Availability Monitoring (SAM)
√ √
N/A
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 11:47:51
--------------------------------HOST ACCESS TABLE------------------------------
Managing Host Telnet FTP SNMP SNMP V1/V2c Rd V1/V2c Wr V1/V2c
IP/Mask Bits Access Access Access Protocol Community Community Access
172.016.000.000/16 All All Write V1/V2c/V3 public private Superv
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
------------------------------------Messages-----------------------------------