CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 163)

Service OAM 9145E NID Software User’s Manual
Maintenance Intermediate Points
149
5. For 802.1ag, to view the VLAN list for that MIP, type 2 and press . The MIP’s
Maintenance Association List opens. If you are configuring a Y.1731 MIP, the VLAN num-
ber is displayed on the screen.
6. If you are configuring an 802.1ag MIP, type A to accept the settings and press .
Press to return to the Maintenance Intermediate Point Attributes screen.
If you are configuring a Y.1731 MIP, go to step 7.
Figure 11-34. Maintenance Intermediate Point Attributes screen (802.1ag)
7. For Y.1731, to change the AIS Transmit interval, type 2 and press . Select 1 sec
or 1 min and press .
8. To change the AIS priority bits, type 3 and press . Type a number from 0 to 7 and
press .
9. Type A to accept the settings and press . Press to return to the Mainte-
nance Intermediate Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
------------------MAINTENANCE INTERMEDIATE POINT ATTRIBUTES---------------------
MIP ID: 1 Type: 802.1ag Level: 0
MD ID: 2 Port: User MAC: 00:40:2A:01:EE:23
1) Admin status: Enabled
2) To see VLAN list.
Select [1-2] for attributes:
------------------------------------Messages-----------------------------------