CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 147)

Service OAM 9145E NID Software User’s Manual
Maintenance End Points
133
11.6 Maintenance End Points
A Maintenance Association End Point (MEP) is an actively managed CFM entity that can gener-
ate and receive CFM PDUs and track any responses. Up to 256 MEPs can be configured in a
9145E NID device.
11.6.1 Display Maintenance End Points
To display a list of existing MEPs, on the SOAM Configuration screen (Figure 11-6), type 5 and
press . The Maintenance End Point List screen (Figure 11-18) opens.
Figure 11-18. Maintenance End Point List screen
11.6.2 Create a Maintenance End Point
1. On the Maintenance End Point List screen (Figure 11-18), type A and press . You
are prompted to enter A for 802.1ag or Y for Y.1731.
2. Type A or Y and press . The Create a New Maintenance End Point screen (Fig-
ure 11-19 for 802.1ag or Figure 11-20 for Y.1731) opens. The first field, MA ID (for
802.1ag) or MEG ID (for Y.1731), is highlighted.
3. Type an MA ID or MEG ID and press . (To view a list of MA/MEGs, press CTRL-L,
type S to select, and press .) The MEP ID field is highlighted.
4. Type a MEP ID and press . The Admin Status field is highlighted.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
--------------------------MAINTENANCE END POINT LIST---------Display 1 - 4 of 4-
MA/MEG MEP ID LEVEL TYPE PORT DIRECTION VLAN LIST
2 1 0 802.1ag NETWORK DOWN N/A
3 1 5 802.1ag USER DOWN 300
10 1 3 802.1ag USER UP 100, 101, 102
101 1 7 Y.1731 USER UP 900
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, CC Data(B)ase, ESC to return:
------------------------------------Messages-----------------------------------