CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 26)

9145E NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
12
Figure 3-4 Auxiliary IP configuration Menu
1. Auxiliary IP Address - Sets the 9145E Auxiliary IP Address.
2. Auxiliary Subnet Mask - - Sets the 9145E Auxiliary IP Subnet Mask.
3. Inband Auxiliary Port - Describes the Auxiliary IP address ports. Allows the
customer to select No Ports, User Port Only, Net Port Only, or Both User and Net
Ports.
4. Auxiliary VLAN Tagging - Enable or Disable Auxiliary IP VLAN Tagging.
5. Auxiliary VLAN Number - Sets Auxiliary IP VLAN ID number (between 0 and 4094).
Default is 0.
6. Allow Any VLAN - Enable or Disable acceptance of any VLAN number. If Auxiliary
VLAN Tagging is Enabled and Allow Any VLAN is Disabled, only packets tagged with
the Auxiliary VLAN Number are accepted. If Auxiliary VLAN Tagging is Enabled and
Allow Any VLAN is Enabled, then any VLAN can be used with the Auxiliary IP.
7. Aux IP Rate Limiting - Enable or Disable Auxiliary IP Rate Limiting. The rate limiting
function is used to rate limit the traffic being received from the Aux IP. The Aux IP
Rate Limiting default setting is enabled. Rate limiting may be set to Disable when
running a test, however, the setting will return to Enabled after five minutes. An on
screen timer shows time remaining until automatic enabling. To extend Disable Time
beyond five minutes, disable Rate Limiting agai
n before Timer expiration.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 11:45:26
-------------------------------AUXILIARY IP CONFIGURATION----------------------
1) Auxiliary IP Address 000.000.000.000
Auxiliary Subnet Mask 255.255.255.000
2) Inband Auxiliary Port Both User and Net Ports
3) Auxiliary VLAN Tagging Disabled
4) Auxiliary VLAN Number 0
5) Allow Any Vlan Disabled
6) Aux IP Rate Limiting Enabled
Select [1-6]: