CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 23)

System Configuration 9145E NID Software User’s Manual
IP/SNMP Agent Configuration
9
3.0 System Configuration Menu
The System Configuration menu (Figure 3-1) allows you to access the screens and menus
necessary to configure various Management, IP, security, and alarm settings. The following
section describes each item of the System Configuration menu.
Figure 3-1 System Configuration Menu
3.1 IP/SNMP Agent Configuration
The IP/SNMP Agent Configuration menu (Figure 3-2) configures the Management IP, Test IP,
and Auxiliary IP settings; and is used to add, edit, or delete Host Table and Trap Table entries.
The Management IP, Test IP, and Auxiliary IP Addresses are used for managing and conducting
testing on a TCP/IP network.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 11:20:59
----------------------------------SYSTEM CONFIGURATION-------------------------
1) IP/SNMP Agent Configuration
2) Trap Configuration
3) Security Configuration
4) Account Configuration
5) System Information
6) RADIUS Client Configuration
7) SNTP Client Configuration
8) SYSLOG Client Configuration
9) Hardware Information
Select [1-9]:
------------------------------------Messages-----------------------------------
Chapter 3
System Configuration