CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 70)

9145E NID Software User’s Manual Port Information
Port Configuration
56
5.2.2 Functional Configuration
From the Port Configuration menu, select the Functional Configuration (2) and press Enter. The
Functional Configuration screen opens. The Functional Configuration screen (Figure 5-5)
displays the User and Network port speed and duplex information, and allows the customer to
set the functions listed below.
Figure 5-5 Functional Configuration Menu
1, User Port Connector This setting controls whether the User Port UTP or SFP connector
is active, regardless of what is physically connected. The Spd LED will blink once a
second over the active connector if it is empty. Use the Space Bar to cycle between the
SFP and UTP connector.
2, User Port Setting - 3.This sets the speed/duplex for the User Port and allows the port to
be disabled. If UTP is selected as the connector, use the Space Bar to cycle between
10M Half, 10M Full, 10M Auto, 100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/
1000 Auto, and Disabled. If SFP is selected as the connector the speed setting is defined
by the SFP. Use the Space Bar to cycle between the available options.
4, Net Port Connector - This setting controls whether the Network Port UTP or SFP
connector is active, regardless of what is physically connected. The Spd LED will blink
once a second over the active connector if it is empty. Use the Space Bar to cycle
between the SFP and UTP connector.
5, Net Port Setting - This sets the speed/duplex for the Network Port and allows the port to
be disabled. If UTP is selected as the connector, use the Space Bar to cycle between
10M Half, 10M Full, 10M Auto, 100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/
1000 Auto, and Disabled. If SFP is selected as the connector the speed setting is defined
by the SFP that has been inserted. Use the Space Bar to cycle between the available
options.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.16 F217 10:14:38
----------------------------------FUNCTIONAL CONFIGURATION---------------------
User Port Speed/Duplex 100M/Full
Net Port Speed/Duplex 1000M/Full
MP Port Speed/Duplex Admin down
MGMT UTP Port Speed/Duplex Admin down
1) User Port Connector UTP
2) User Port Setting 10/100/1000M Auto
3) Net Port Connector SFP
4) Net Port Setting 1000M Full
5) RMTF Disabled
6) GigE RMTF Mode Both Ports CP Proprietary
7) LLF Disabled
8) Flow Control Disabled
9) Maximum Frame Size 10000
Select [1-9]:
------------------------------------Messages-----------------------------------