CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 116)

9145E NID Software User’s Manual Class of Service Configuration
Queue Configuration
102
10.2.3.3 AF/EF Mode
Type the number of the AF code, a series of codes such as 11-13 if desired, E for Expedited
Forwarding CoSQ, or D for Default CoSQ, and press Enter. The cursor moves to the CoSQ
setting in the next column, or the first number/value of the series (for example: 3 if 3 - 7) is
highlighted. Use the Space Bar to scroll through the available queues. Select a queue and press
Enter. If a series of codes was chosen, all of those CoSQs will be changed. Once all CoSQs are
set, press Esc to return to the Classifier Mapping screen.
Figure 10-6 Untagged Packet Classifier Mapping Screen - AFEF Mode
10.3 Queue Configuration
From the Class of Service Configuration screen, type either 3 or 8 and press Enter. The Queue
Configuration screen (Figure 10-7) opens.
The Ingress and Egress Configuration screens are organized so that the queue parameter
settings are listed from the highest priority queue on the top of the screen to the lowest priority
queue at the bottom of the screen.
From this screen the user can optimize the queues to insure better performance of the service.
As an example, all service frames that are time sensitive, such as VOIP, will go through a Strict
Priority Queue and the buffer would not allow to store few packets. An order example will be for
internet traffic is not time sensitive and therefore will go through a low priority queue but will a
high queue size to allow to buffer packets.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-1970
Model 9145E-104-0-0 V43.12 F214 00:39:36
-------------------INGRESS UNTAGGED PACKET CLASSIFIER MAPPING-------------------
AFEF Mode
Class 1 Class 2 Class 3 Class 4
DSCS CoSQ DSCS CoSQ DSCS CoSQ DSCS CoSQ
---- ---- ---- ---- ---- ---- ---- ----
Low Drop Precedence AF11 Q1 AF21 Q1 AF31 Q1 AF41 Q2
Med Drop Precedence AF12 Q1 AF22 Q1 AF32 Q1 AF42 Q2
High Drop Precedence AF13 Q1 AF23 Q1 AF33 Q1 AF43 Q2
Expedited Forwarding CoSQ: Q3
Default CoSQ: Q1
Select AF Code or a Range x-y [11-43], [E]F, [D]efault:
------------------------------------Messages-----------------------------------