CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 162)

9145E NID Software User’s Manual Service OAM
Maintenance Intermediate Points
148
Figure 11-33. Create a New Maintenance Intermediate Point screen (Y.1731)
11.7.3 Delete a Maintenance Intermediate Point
When you delete a Maintenance Intermediate Point, it is also deleted from the AIS client lists.
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type D and press
. The current MIP is highlighted.
2. Press to scroll through the list and highlight the entry you wish to delete.
3. Press to delete the highlighted MIP. You are prompted to confirm the deletion.
11.7.4 Modify a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type E and press
. The current MIP is highlighted.
2. Press to scroll through the list and highlight the entry to modify.
3. When the MIP you want to modify is highlighted, press . The Maintenance Inter-
mediate Point Attributes screen for that MIP (Figure 11-35 for 802.1ag or Figure 11-36 for
Y.1731) opens.
4. To change the Admin Status, type 1 and press . Select Enabled or Disabled and
press . When a MIP is disabled, it does not process any requests it receives.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MEG ID 0
2) MIP ID: 0
3) Admin status: Disabled
4) Port: User
Enter number in range 1 - 65535, or (CTRL-L) to select from list.
------------------------------------Messages-----------------------------------