CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 43)

System Configuration 9145E NID Software User’s Manual
System Information
29
1. From the System Configuration menu, select System Information (5) and press Enter.
The System Information screen (Figure 3-17) opens.
2. Type the number of the parameter to enter information about, then press Enter.
3. Type in new information or edit existing information.
4. To return to the Main Menu, press Esc. When finished, use Enter to save the settings,
then Esc to return to the System Configuration menu.
Figure 3-17 System Information Screen
1. System Name - The system name can be up to 25 characters long. It is displayed in the
header under Ethernet Network Interface Device. If you are running multiple telnet ses-
sions, you will be able to identify the NID you are viewing.
2. Contact - up to 25 characters
3. Location - up to 25 characters
4. Customer - up to 25 characters
5. Information - two lines, up to 40 characters each
6. Circuits - two lines, up to 25 characters each
7. Service Code - up to 10 characters
8. Date-in-Service - [mm/dd/yyyy] - displays when the 9145E was placed into service
9. Date-Out-of-Service - [mm/dd/yyyy] - displays when the 9145E was last taken out of
service
10. Equipment Type - up to 10 characters
11. Equipment Code - up to 10 characters
12. Vendor - up to 25 characters
13. CLEI - Common Language Equipment Identification (CLEI) up to 10 characters
14. Mfg Date - [mm/dd/yyyy] - an editable date field
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 15:52:50
------------------------------SYSTEM INFORMATION-------------------------------
1. System Name : dut-1-147
2. Contact :
3. Location :
4. Customer :
5. Information :
:
6. Circuits :
:
7. Service Code :
8. Date-in-Service :
9. Date-Out-of-Service :
10. Equipment Type :
11. Equipment Code :
12. Vendor : Canoga Perkins
13. CLEI :
14. Mfg Date : 02/01/2008