Kontron S5500 SEL Troubleshooting - Manual (Page 60)

System Event Log Troubleshooting Guide for Intel ® S5500/S3420 series Server Boards Memory subsystem
Revision 1.0 Intel order number G74211-001 51
Byte Field Description
13
Event Direction and
Event Type
[7] Event direction
0b = Assertion Event
1b = Deassertion Event
[6:0] Event Type = 09h (digital Discrete)
14 Event Data 1
[7:6] – 10b = OEM code in Event Data 2
[5:4] – 00b = Unspecified Event Data 3
[3:0] – Event Trigger Offset as described in Table 53
15 Event Data 2 Not used.
16 Event Data 3 Not used.
Table 53: Mirroring Configuration Status Sensor Event Trigger Offset – Next Steps
Event Trigger Offset
Description Next Steps
Hex Description
01h
The system has been configured into
Mirrored Channel RAS Mode. User enabled mirrored channel
mode in setup.
Informational event only.
00h
The system has been configured out
of Mirrored Channel RAS Mode.
Mirrored channel mode is
disabled (either in setup or due
to unavailability of memory at
post, in which case post error
8500 is also logged). 1. If this event is accompanied by a post error 8500, there was a problem applying the
mirroring configuration to the memory. Check for other errors related to the memory
and troubleshoot accordingly.
2. If there is no post error then mirror mode was simply disabled in bios setup and this
should be considered informational only.