Kontron S5500 SEL Troubleshooting - Manual (Page 56)

System Event Log Troubleshooting Guide for Intel ® S5500/S3420 series Server Boards
Processor subsystem
Revision 1.0 Intel order number G74211-001 47
8.4.2 QPI Non-Fatal Error Sensor
The system detected a QPI non-fatal error that is recoverable. This is an informational event.
Table 49: QPI Non-Fatal Error Sensor Typical Characteristics
Byte Field Description
8
9
Generator ID 0033h = BIOS SMI Handler
11 Sensor Type 13h = Critical Interrupt
12 Sensor Number 07h
13
Event Direction and
Event Type
[7] Event direction
0b = Assertion Event
1b = Deassertion Event
[6:0] Event Type = 73h (OEM Discrete)
14 Event Data 1
[7:6] – 10b = OEM code in Event Data 2
[5:4] – 00b = Unspecified Event Data 3
[3:0] – Event Trigger Offset = Reserved
15 Event Data 2 0-3 = CPU1-4
16 Event Data 3 Not used.
8.4.2.1 QPI Non-Fatal Error Sensor – Next Steps
This is an Informational event only. Non-Fatal errors are acceptable and normal at a low rate of occurrence. If error continues:
1. Check the processor is installed correctly.
2. Inspect the socket for bent pins.
3. Cross test the processor if possible.